A New Ham’s Guide
How to Use Amateur (Ham Radio) Repeaters by N4UJW
Used with non-commercial rights from Ham Universe All Rights Reserved

Simple enough for even me to understand!
This article will help the New Ham to be more at home on repeaters and understand the operation and procedures on Ham Radio Repeaters.
It contains a basic description of a ham radio repeater, how to use it properly and is written with the NEW HAM  in mind for one of the most popular ham bands….2 meters.

What is a Repeater and Why is it Needed, and How Does It Work?
What: It’s a two-way radio system that receives on one frequency, then re-transmits what it receives on another frequency; at exactly the same time. It’s nothing more than a “dumb electronic machine” with some smart people behind it.

Why it’s needed: Your mobile or hand held transceiver, has a limited range due to it’s antenna height with respect to the radio horizon and rf attenuating surroundings.  Repeater systems are used to “transfer” your transmitted and received signals to much higher levels electronically using large, very efficient high gain antennas, low loss feedlines and a transmitter and receiver that is rated for heavy or continuous duty. A repeater “gets out” your signal and receives the station you are talking to with a far greater range and coverage area! You take advantage of the repeater’s higher elevation to increase your effective transmitting and receiving coverage versus your mobile or hand held transceiver!

How does a Repeater work?
Here’s a simple block diagram of a repeater below:

More about Repeaters. See these very informative videos below from K7AGE, Randy.
A video is worth a thousand words! 3 Parts and a must see! (About 10 to 11 minutes each)

How to Use Amateur (Ham Radio) Repeaters Pt. 2

Click on the button when you are ready to go on to Part 2 of the How to Use Amateur (Ham Radio) Repeaters series

On to Pt.2